Publications Available Online
Selected publications of the Tennessee Geological Survey are available for download. Many of these publications are no longer in print or are unavailable via our publications catalog.
Publications are grouped into tabs on the left side of the frame by series title (Bulletins, Reports of Investigations, etc.); clicking a series title reveals the available publications. Clicking on the name of a publication (e.g., "Bulletin 1") reveals its bibliographic information and an abstract as well as a list of available plates (maps, charts, tables, etc.). All files are stored in PDF format and can be viewed directly in most web browsers or with Adobe Acrobat Reader.

Bulletin 1A – The Establishment, Purpose, Scope and Methods of the State Geological Survey, 33 p., by Geo. H. Ashley (1910).
Bulletin 1B – Bibliography of Tennessee Geology, Soils, Drainage, Forestry, etc., 117 p., by Elizabeth Cockrill (1911).

Bulletin 3A – Drainage Problems in Tennessee, 10 p., by Geo. H. Ashley (1910).
Bulletin 3B – Preliminary Report upon the Drainage of the Lands Overflowed by the North and Middle Forks of the the Forked Deer River and the Rutherford Fork of the Obion River in Gibson County, Tennessee, 26 p., by A.E. Morgan and S.H. McCrory (1910).
Bulletin 3C – Drainage Law of Tennessee, 28 p. (1910).

Bulletin 4 – Administrative Report of the State Geological Survey, 59 p., by Geo. H. Ashley (1911).

Bulletin 10A – Preliminary Study of Forest Conditions in Tennessee, 56 p., by R.C. Hall (1910).
Bulletin 10B – Chestnut in Tennessee, 35 p., by W.W. Ashe (1911).
Bulletin 10C – Yellow Poplar in Tennessee, 56 p., by W.W. Ashe (1911).

Bulletin 13 – The Resources of Tennessee, 36 p., by G.H. Ashley (1911).

Bulletin 14 – The Zinc Deposits of Northeastern Tennessee, 69 p., by A.H. Purdue (1912).

Bulletin 21 – Stratigraphy and Correlation of the Devonian of Western Tennessee, 127 p., by C.O. Dunbar (1919).
Detailed geologic sections, fossil plates, faunal charts, etc.

Bulletin 24-2A – Geology and Oil Possibilities of the Northern Part of Overton County, Tennessee, and Adjoining Parts of Clay, Pickett, and Fentress Counties, 45 p., by Chas. Butts (1919).
Stratigraphy, structural conditions; structure map (see Plate 2); table of wells and oil horizons. (See Bulletin 47).

Bulletin 24-2A, Plate 2 – Map of the northern part of Overton County and parts of adjacent counties in Tennessee showing geologic structure.

Bulletin 24-2B – Oil and Gas Resources of the Northern Part of Sumner County, Tennessee, 39 p., by K.F. Mather (1920).
Stratigraphy, structural conditions; correlation with Kentucky sands; recommendations; logs.

Bulletin 24-2B, Plate 1 – Map of part of Sumner County, Tennessee, showing geologic horizons, structure contours on top of the Chattanooga Shale, and oil and gas borings.

Bulletin 28 – Marble Deposits of East Tennessee (3 parts), 264 p., (1924).
- Part I – History, Occurrence, and Distribution, 86 p., 10 pls., 13 figs., C.H. Gordon.
- Part II – Constitution and Adaptation of Holston Marble, 76 p., 15 pls., 16 figs., T.N. Dale.
- Part III – Technology of Marble Quarrying. 102 p., 16 pls., 29 figs., Oliver Boles.

Bulletin 28, Plate 1 – Marble Belt of Knoxville and Vicinity

Bulletin 28, Plate 2 – Marble Belt of Friendsville and Vicinity

Bulletin 31 – Zinc Deposits of East Tennessee, 165 p., by M. H. Secrist (1924).
Detailed report on mines and prospects by districts, discusses genesis, occurrences, mining, milling, etc.; analyses, flotation tests, geologic section, photomicrographs, etc.

Bulletin 31, Plate 1 – Geologic map of East Tennessee, showing location of Zinc mines and prospects and their relation to the geologic formations.

Bulletin 31, Plate 16 – Panoramic view of American Zinc Company's plant, Mascot, Tenn., December, 1922.

Bulletin 37 – Geology and Mineral Resources of Hardin County, Tennessee, 118 p., by W. B. Jewell (1931).
Location, development, topography, geology, structure, water power, economic resources, analyses.

Bulletin 37, Plate 9 – Areal geology of Hardin County, Tennessee.

Bulletin 38 – The Stratigraphy of the Central Basin of Tennessee, 268 + x p., by R. S. Bassler (1932).
Describes the geology of all counties in the Central Basin and reports on economic minerals: phosphate, limestone, oil and gas, road metal, bentonite, and clays.

Bulletin 38, Figure 4 – Correlation table

Bulletin 39 – The Brown Iron Ores of the Western Highland Rim, Tennessee, 227 + xiv p., by E.F. Burchard (1934).
History, geology, composition, and origin of ores; descriptions of mines and prospects by counties, analyses, flow-sheets, etc.

Bulletin 47 – Geology and Petroleum Resources of Clay County, Tennessee, 188 + vii p., by Kendall E. Born and H. B. Burwell (1939).
First detailed report on an area that has produced from the Ordovician for nearly 75 years. Areal geology, stratigraphy, subsurface geology, structure, and oil developments.

Bulletin 47, Plate 1 – Areal geologic and structure map, Clay County, Tennessee.

Bulletin 47, Table 1a – Summary of data on test wells drilled in Clay and adjoining counties.

Bulletin 47, Table 1b – Summary of data on test wells drilled in Clay and adjoining counties (continued).

Bulletin 48 – The Phosphate Resources of Tennessee, 444 + xii p., by R.W. Smith and G.I. Whitlatch (1940).
First detailed description of brown and blue phosphates, with extensive reprinting of earlier data on white phosphate. Physiography, areal geologic map, and fossil plates; stratigraphy, description of mining industry, and phosphate deposits by districts; reserve estimates, future of industry.

Bulletin 48, Plate 2 – Progress Geologic Map of Middle Tennessee

Bulletin 48, Plate 8 – Geologic Map of the Franklin Quad, Tennessee

Bulletin 48, Plate 10 – Map of Lands on Swan Creek and its Tributaries in Hickman County, Tennessee

Bulletin 48, Plate 12 – Map of Swan Creek Phosphate District

Bulletin 48, Plate 13 – Perry County Phosphate District

Bulletin 48, Plate 14 – Geologic Map of Johnson County, Tennessee

Bulletin 49 – The Clays of West Tennessee, 368 + vii p., by G.I. Whitlatch (1940).
Detailed report on the clay mining and manufacturing industries and undeveloped clays of the area, with accompanying ceramic and chemical data. Stratigraphy, formation, and properties of clays; general technology of clay industries, clay mines, clay working plants, undeveloped deposits by geologic formation and counties; location map of mines; outcrops, etc.

Bulletin 49, Plate 1 – Outline map of Tennessee showing Clay Belts & Ceramic Resources of each belt

Bulletin 49, Plate 10 – Clay Resources Map of Western Tennessee

Bulletin 54 – Geology and Mineral Deposits of Bumpass Cove, Unicoi and Washington Counties, Tennessee, 82 + vii p by John Rodgers (1948).
Detailed description of stratigraphy and structure of Bumpass Cove. Occurrence, origin, history, production, methods of exploitation, economic possibilities of mineral deposits, and detailed description of individual iron, lead, zinc, and manganese mines.

Bulletin 54, Plate 1 – Geologic Map of Bumpass Cove, Unicoi and Washington Counties, Tennessee

Bulletin 54, Plate 2 – Structure Sections Across Bumpass Cove

Bulletin 54, Plate 3 – Structure Map of Bumpass Cove

Bulletin 54, Plate 4 – Land Forms of Bumpass Cove

Bulletin 54, Plate 5 – Structural Map of Jackson Mine

Bulletin 58, Part 1 – Ground-Water Resources of East Tennessee, 393 + x p., by G.D. DeBuchananne and R.M. Richardson (1956).
Text is principally tabular data for typical wells and springs in 28 counties; also discharge measurements of selected springs, and analyses of ground water. Plates consist of 14 colored geologic maps on a scale of 1:125,000 (1 inch=2 miles), showing locations of wells and springs inventoried; one sheet of geologic cross sections (see Plates below).
Geologic maps showing locations of wells and springs are listed alphabetically with plate number identified after title.

Asheville
(Plate 11)

Cleveland
(Plate 13)

Kingston
(Plate 7)

Maynardville
(Plate 2)

Murphy
(Plate 14)

Briceville
(Plate 1)

Cranberry
(Plate 6)

Knoxville
(Plate 9)

Morristown
(Plate 3)

Roan Mountain
(Plate 5)

Chattanooga
(Plate 12)

Greeneville
(Plate 4)

Loudon
(Plate 8)

Mt. Guyot
(Plate 10)

Cross Sections
(Plate 15)

Bulletin 58, Part 2 – Geologic Map of East Tennessee with Explanatory Text, 168 + vi p., by John Rodgers (1953).
A (new) geologic map of the Unaka Mountains and the Valley of East Tennessee is presented, and the accompanying text describes the rock units shown on the map and their stratigraphy. Also discusses areas still in need of detailed geologic mapping. Plates consist of 14 geologic maps in color, showing locations of wells and springs inventoried; one sheet of geologic cross sections (see Plates below).
Geologic maps showing locations of wells and springs are listed alphabetically with plate number identified after title.
Scale: 1:125,000 (1 inch = 2 miles)

Asheville
(Plate 11)

Cleveland
(Plate 13)

Kingston
(Plate 7)

Maynardville
(Plate 2)

Murphy
(Plate 14)

Briceville
(Plate 1)

Cranberry
(Plate 6)

Knoxville
(Plate 9)

Morristown
(Plate 3)

Roan Mountain
(Plate 5)

Chattanooga
(Plate 12)

Greeneville
(Plate 4)

Loudon
(Plate 8)

Mt. Guyot
(Plate 10)

Cross Sections
(Plate 15)

Bulletin 60 – The Cumberland Plateau Overthrust and Geology of the Crab Orchard Mountains Area, Tennessee, 47 + vi p., by Richard G. Stearns (1954).
Describes the stratigraphy of the Crab Orchard Mountains area and traces the fault system crossing this region that is an overthrust block similar to the Pine Mountain block. Includes a geologic map in color of the Crab Orchard Mountains area (see Plate below).

Bulletin 60, Plate 1 – Geologic Map of the Crab Orchard Mountains Area, Tennessee by R.G. Stearns, J.W. Jewell, and B.M. Rascoe (mapped 1949-1951)
Scale: 1:31,680 (1 inch = 0.5 mile)

Bulletin 62 – Well Logs In Tennessee, 606 p., by H.C. Milhous (1959).
A collection of driller's logs, sample descriptions, and miscellaneous data covering approximately 560 holes drilled in 68 Tennessee counties. Includes Carter coordinate index map (see Plate below).

Bulletin 62, Plate 1 – Carter Coordinate System in Tennessee (including explanatory text)
Scale: 1:1,000,000 (1 inch = 16 miles)

Bulletin 68 – Geology of the Wells Creek Structure, Tennessee, 236 + xii p, by C.W. Wilson, Jr., and R.G. Stearns (assisted by H.A. Tiedemann, J.T. Wilcox, and P.S. Marsh) (1968).
Detailed study of stratigraphy, structure, and geophysics of Wells Creek Structure. Suggests meteor impact origin. Plates include a geologic map, structure contour map, and Bouguer gravity map of the Wells Creek Area (1:48,000-scale) and a detailed geologic map (scale 1:6,000; in color) of the Wells Creek Basin (see Plates below).

Bulletin 68, Plate 1 – Geologic Map of the Wells Creek Area, Tennessee by R.G. Stearns, H.A. Tiedemann, and C.W. Wilson, Jr. (1968).
Scale: 1:48,000 (1 inch = 0.75 mile)

Bulletin 68, Plate 2 – Geologic Map Wells Creek Basin by H.A. Tiedemann, C.W. Wilson, Jr., and R.G. Stearns (1968).
Scale: 1:6,000 (1 inch = 500 feet)

Bulletin 68, Plate 3 – Structure Contour Map on top of the Mississippian Fort Payne Formation of the Wells Creek Area by R.G. Stearns (1968).
Scale: 1:48,000 (1 inch = 0.75 mile)

Bulletin 68, Plate 4 – Bouguer Gravity Anomaly Map of the Wells Creek Area by R.G. Stearns and P.S. Marsh (1968)
Scale: 1:48,000 (1 inch = 0.75 mile)

Bulletin 70 – Geology of Knox County, Tennessee, 184 + xii p, by 20 contributors (1973).
Includes papers on the geomorphology, stratigraphy, structure, gravity surveys, mineral resources, engineering geology, soils, water resources, and caves of Knox County. With guide to Southeastern GSA field trips for 1973. Three road logs with complete stop descriptions and cross sections. Plates (in pocket) include a generalized geologic map of Knox County (scale 1:48,000), a Bouguer gravity map, and a residual gravity map (see Plates below).

Bulletin 70, Plate 1 – Generalized Geologic Map of Knox County, Tennessee, with mineral resources, mineral industries, and caves. Geology compiled by R.C. Milici, mineral resources and industries by S.W. Maher, and caves of Knox County by H.L. Moore, III (1973).
Scale: 1:48,000 (1 inch = 0.75 mile)

Bulletin 70, Plate 2 – Bouguer Gravity Map of Knox County, Tennessee by W.P. Staub and V.C. Johnson (1973).
Scale: 1:125,000 (1 inch = 2 miles)

Bulletin 70, Plate 3 – Residual Gravity Map of Knox County, Tennessee by W.P. Staub and V.C. Johnson (1973).
Scale: 1:125,000 (1 inch = 2 miles)

Bulletin 71 – Annotated Bibliography of the Geology of Tennessee, January 1961 – December 1970, 141 + iii p, by C.W. Wilson, Jr. (1973).
Supplement to Bulletins 59 and 67. Contains three separate bibliographies; General, Geologic Map Series, and Mineral Resources Summaries Series; each listed by author index and subject index. Includes a quadrangle index map (see Plate below).

Bulletin 71, Plate 1 – Index to Quadrangle Maps in Tennessee
Scale: 1:1,000,000 (1 inch = 16 miles)

Bulletin 76 – Subsurface Information Catalog of Tennessee 1866-1974, 146 + ii p, by A. Statler, P. Bloss, and R. Zurawski (1975).
A listing of all Tennessee wells through 1974 that are on file with the Tennessee Division of Geology. Includes Carter Coordinate and topographic index map (scale ~1:1,000,000; see Plate below).

Bulletin 76, Plate 1 – Carter Coordinate Map and Topographic Index of Tennessee
Scale: 1:1,000,000 (1 inch = 16 miles)

Bulletin 78 – Seismic Investigations in Eastern Tennessee, 68 + vii p, by Edward T. Tegland (1978).
A report of geophysical seismic investigations in eastern Tennessee prepared as part of a study of eastern gas shales sponsored by the Department of Energy. Provides insight into the subsurface geology of the region and defines the possible subcrop limits of Devonian shales associated with several major thrust features. Plates include geologic maps, velocity models, and interpreted depth sections (scales vary; see Plates below).

Plate 1A
Seismic-Geologic Base Map
Line K-1 S (DP 100-454)

Plate 1B
Seismic-Geologic Base Map
Line TC-1 (DP 100-1568)

Plate 1C
Seismic-Geologic Base Map
Line TC-2A (DP 100-1870)

Plate 1D
Seismic-Geologic Base Map
Line TC-2B (DP 1870-2996)

Plate 2A
Velocity Model
K-1 S (DP 100-454)

Plate 2B
Velocity Model
TC-1 (DP 100-400)

Plate 2C
Velocity Model
TC-1 (DP 400-820)

Plate 2D
Velocity Model
TC-1 (DP 820-1580)

Plate 2E
Velocity Model
TC-2 (DP 100-520)

Plate 2F
Velocity Model
TC-2 (DP 520-1580)

Plate 2G
Velocity Model
TC-2 (DP 1580-2240)

Plate 2H
Velocity Model
TC-2 (DP 2240-2840)

Plate 3A
Interpreted Depth Section
K-1 S (DP 101-454)

Plate 3B
Interpreted Depth Section
TC-1 (DP 101-800)

Plate 3C
Interpreted Depth Section
TC-1 (DP 801-1568)

Plate 3D
Interpreted Depth Section
TC-2 (DP 101-764)

Plate 3E
Interpreted Depth Section
TC-2 (DP 765-1589)

Plate 3F
Interpreted Depth Section
TC-2 (DP 1590-2238)

Plate 3G
Interpreted Depth Section
TC-2 (DP 2239-2996)

Bulletin 79 – Geology of Hamilton County, Tennessee, 120 p, by 8 contributors (1978).
Includes papers on the stratigraphy, structure, mineral resources, coal mining and ground water. (An 86-page companion volume, Report of Investigations 37, supplements Bulletin 79 and contains road logs, descriptions, and diagrams. Available separately). Plates include maps of the bedrock geology and environmental geology (scale 1:48,000; see Plates below).

Bulletin 79, Plate 1 – Geologic Map of Hamilton County, Tennessee, including mineral resources data and contours showing magnetic intensity. Compiled by R.C. Milici, R.L. Wilson, S.W. Maher, A.R. Leamon, L.M. Knox, and R.W. Johnson, Jr. (1978).
Scale: 1:48,000 (1 inch = 0.75 mile)

Bulletin 79, Plate 2 – Environmental Geology of Hamilton County, Tennessee. Compiled by P.D. Sitterly and R.L. Wilson (1978).
Scale: 1:48,000 (1 inch = 0.75 mile)

RI 5: Guidebook to Geology Along Tennessee Highways, 115 + xii p., by C.W. Wilson, Jr. (1958).
Presents thirty-four highway logs with mileages and observable features present at the time of authorship. Each route consists of an overview of the geology and many contain diagrams illustrating the relationships of the strata. This publication predates the Intersate highway system.

RI 5, Figure 1 – Route Map of Geologic Logs in Tennessee
Scale: 1:1,000,000 (1 inch = 16 miles)

RI 6: Cretaceous, Paleocene, and Lower Eocene Geologic History of the Northern Mississippi Embayment, 24 p, by Richard G. Stearns (1958). Reprinted from Bulletin of the Geological Society of America, vol. 68, pp. 1077-1100 (1957).
Discusses the cycles of deposition and subsequent subsidence in the Northern Mississippian Embayment and presents a series of paleogeographic maps and cross sections to support interpretations made from electric log correlations.

RI 7: Geology of Ground-Water Resources of the Dyersburg Quadrangle, Tennessee, 61 p., by Raymond L. Schreurs and Melvin V. Marcher (1959).
Geology, hydrology, and water resources of a 240-square-mile area in the Mississippi Embayment. Includes a physiographic map in color, a geologic map in color with cross sections, and a water resources map (see Plates below).

RI 7, Plate 1 – Physiographic Map of the Dyersburg Quadrangle, Tennessee, by R.L. Schreurs and M.V. Marcher (1959).
Scale: 1:63,360 (1 inch = 1 mile)

RI 7, Plate 2 – Geologic Map and Configuration of the Buried Eocene Bedrock of the Dyersburg Quadrangle, Tennessee, by R.L. Schreurs and M.V. Marcher (1959).
Scale: 1:63,360 (1 inch = 1 mile)

RI 7, Plate 3 – Water Resources Map: Sources of water and location of important wells in the Dyersburg Quadrangle, Tennessee, by R.L. Schreurs and M.V. Marcher (1959).
Scale: 1:63,360 (1 inch = 1 mile)

RI 10: The High-Silica Resources of Tennessee, 62 + iv p., by Robert Hershey (1960).
A study of representative samples from 24 selected localities; includes beneficiation procedures and results. Gives physical descriptions, grain-size determinations, and chemical analyses of samples (see Plate below).

RI 10, Plate 1 – Index map showing sample localities, sand and sandstone distribution, and railroad and water transportation.
Scale: 1:3,168,000 (1 inch = 50 miles)

RI 12: Geology of the Mascot-Jefferson City Zinc District, Tennessee, 29 p, by C.R.L. Oder and J.E. Ricketts (1961).
Describes the geology and geological problems of the ore deposits including the geologic setting, structure, and genesis of the ores; road log from Knoxville to Young mine with return trip via alternate route; Young mine tour. Includes a geologic map and detailed stratigraphic sections of the Mascot and Kingsport formations, as well as a representative drill hole log (see Plates below).
Published with the cooperation of the Southeastern Section of the Geological Society of America, on the occasion of its annual meeting at Knoxville, Tennessee, April 13-15, 1961.

RI 12, Plate 1 – Geologic Map of Mascot-Jefferson City District, Knox and Jefferson Counties, Tennessee. From Josiah Bridge's map of 1945.
Scale: 1:42,240 (1 inch = 0.667 mile)

RI 12, Plate 2 – Detailed sections of Mascot and Kingsport Formations, Mascot-Jefferson City District, Tennessee, by C.R.L. Oder.
Scale: 1 inch = 20 feet

RI 12, Plate 3 – Log of diamond drill hole No. TSB-14, Tri-State Zinc, Inc.
Total depth 1,200 feet.

RI 14: Pennsylvanian Rocks of Southern Appalachians, by R.G. Stearns and R.M. Mitchum, Jr. (1962).
Describes the geology, lithology, timing and trends of deposition, deformation and geomorphology of Pennsylvanian strata in the southern Appalachians. Figures contain stratigraphic relationship diagrams, and small-scale isopach and lithofacies and structure maps.
Reprinted from American Association of Petroleum Geologists, Pennsylvanian System in the United States, pp. 74-96 (1962).

RI 16: Geology of the Dover Area, Stewart County, Tennessee, 39 p., 3 figs., 2 pls., by Melvin V. Marcher (1962).
Stratigraphy, structure, geologic history, environments of deposition; emphasis on Mississippian formations. Includes geologic map (in color) and chart of representative sections (see Plates below).
Prepared in cooperation with the U.S. Geological Survey.

RI 16, Plate 1 – Geologic Map of the Dover Area, Stewart County, Tennessee, by Melvin V. Marcher (1962).
Scale: 1:62,500 (1 inch = ~1 mile)

RI 16, Plate 2 – Representative Sections of the Fort Payne Chert, Warsaw Limestone, and St. Louis Limestone.

RI 21: Well Sample Descriptions and Drillers' Logs, Scott County, Tennessee, 201 + vii p., by H.B. Burwell (1967).
Also see Oil and Gas Map, Scott County, Tennessee.

RI 24: Stratigraphy of the Chickamauga Supergroup in its Type Area, 32 p., 4 figs., 1 table, by Robert C. Milici and James W. Smith (1969).
Detailed discussion of Chickamauga strata including the Stones River and Nashville Groups. Figures conatin maps of type locatities and a stratigraphic correlation diagram.
Reprinted from Georgia Geological Survey Bulletin 80

RI 29: Structure of the Dumplin Valley Fault Zone in East Tennessee, 12 p., by Robert D. Hatcher, Jr. (1970).
Reprinted from Southeastern Geology, 1969

RI 33: Carboniferous Depositional Environments in the Cumberland Plateau of Southern Tennessee and Northern Alabama, 32 p., by John C. Ferm, Robert C. Milici, James E. Eason, and others (1972).
Describes the depositional environmental factors that contributed to the formation of Carboniferous strata of the southern Cumberland Plateau. Contains route maps and stop descriptions for a 2-day field trip through northeastern Alabama, northwestern Georgia, and southeastern Tennessee.
Prepared for the pre-meeting field trip of the Southeastern Section of the Geological Society of America, March 25-26, 1972.

IC 2: Oil for Today and for Tomorrow, 35 p., by Interstate Oil Compact Commission (1953).
Origin, production, and conservation of oil.

IC 6: The Zinc Industry of Tennessee, 28 + iv p., by Stuart W. Maher (1958).
Geology of the deposits, history, economic aspects, and future of the industry. Appendix gives Tennessee grid coordinate locations for all known mines, prospects, and occurrences.

IC 9: The Marble Industry of Tennessee, 25 + iii p., by Stuart W. Maher and Joe P. Walters (1960).
History of the industry; present operations; geology; quarrying and fabrication procedures; uses; economic potential.

IC 9, Plate 1 – Marble Resource Map; known areas of potential economic importance, by Stuart W. Maher (1960).
Scale: 1:633,600 (1 inch = 10 miles)

IC 14: The Copper-Sulfuric Acid Industry in Tennessee, 28 + iv p., 3 figs., 1 table, by Stuart W. Maher (1966).
DIscusses the history of the industry; geology; mining and processing of the ore; marketing and subsidiary products; economic significance and potential.

IC 15: Circumferential Faulting Around Wells Creek Basin, Houston and Stewart Counties, Tennessee—A Manuscript by J. M. Safford and W. R. Lander, Circa 1895, 12 p., 7 figs., by Charles W. Wilson, Jr. and Richard G. Stearns (1966).
Summarizes the history of early field work and mapping done on the Wells Creek structure in the late 1800s. The manuscript by Safford and Lander, which was lost, is published here for the first time accompanied by their maps along with addictional figures to aide the reader in understanding the stratigraphic nomenclature and geographic terminology used at the time.

IC 17: Coal Mining in Tennessee (as of November 1974), 35 + i p., by A. R. Leamon and S. W. Maher (1975).
A summary of information about Tennessee’s coal industry. Map (scale 1:250,000) shows locations of active coal mines. Annotated bibliography of publications with coal information.

IC 17, Plate 1 – Location Map of Active Coal Mines in Tennessee (as of November 1974), by A.R. Leamon (1975).
Scale: 1:250,000 (1 inch = 4 miles)

EGS 1: Geologic Evaluation of Sanitary Landfill Sites in Tennessee, 38 p., 18 figs., 2 pls., 1 section, by Robert A. Miller and Stuart W. Maher (1972).
Outlines and discusses geologic criteria for the locating of landfills, and evaluates each geologic formation in Tennessee on the basis of these criteria.

EGS 2: Environmental Geology Summary of the Kingston Springs Quadrangle, Tennessee, 23 + ii p., 5 figs., 8 tables, 4 pls., by Robert A. Miller (1973).
Maps show areal geology, structure, economic geology, potentially unstable slopes, areas of known flooding, and water availability (see Plates below). Text includes rock and soil unit description and basic engineering characteristics, hydrologic data, and topographic data. Rock and soil units are rated on the basis of suitability for certain classes of land-use.

EGS 2, Plate 1 – Geologic Map of the Kingston Springs Quadrangle, Tennessee, by Robert A. Miller and Charles W. Wilson, Jr. (1973).
Scale 1:24,000 (1 inch = 2,000 feet)

EGS 2, Plate 2 – Areas of Potentially Unstable Slopes in the Kingston Springs Quadrangle, Tennessee, by Robert A. Miller (1973).
Scale 1:24,000 (1 inch = 2,000 feet)

EGS 2, Plate 3 – Flood-Prone Areas of the Harpeth and South Harpeth Rivers in the Kingston Springs Quadrangle, Tennessee, by Robert A. Miller (1973).
Delineates areas inundated by "floods of record".
Scale 1:24,000 (1 inch = 2,000 feet)

EGS 2, Plate 4 – Water Availability in the Kingston Springs Quadrangle, Tennessee, by Robert A. Miller (1973).
Scale 1:24,000 (1 inch = 2,000 feet)

EGS 4: Earthquake Hazards in Tennessee, 27 + iii p., 15 figs., by Richard G. Stearns and Robert A. Miller (1977).
Discusses the history of earthquakes in and near Tennessee, their causes, the geologic setting, measurement, and predictability of future events, and the planning process as it relates to seismic risks and safety features.

EGS 8: Earthquake Data for Tennessee and Surrounding Areas, 63 + iv p., 1 pl., 3 figs., 2 tables, by Terry R. Templeton and Barry C. Spencer (1980).
Presents earthquake data in such a way as to either resolve the ambiguities or define existing uncertainties. In addition to earthquake magnitudes and intensities, types of earthquake waves are also discussed. Completeness of the earthquake record is discussed. Map displays known earthquakes in Tennessee with a modified Mercalli intensity of I or greater (see Plate below).

EGS 8, Plate 1 – Locations of Earthquakes in Tennessee and Surrounding Areas (1699-1979), compiled by Terry R. Templeton (1980).
Scale 1:1,000,000 (1 inch = 16 miles)
EGS 9: Environmental Geology Atlas of Maury County, Tennessee, 5 maps, by Robert A. Miller (1983).
Maps with explanatory text present principal rock units and their engineering properties, describe mineral resources, and outline potential hazards in various parts of the county (see Plates below).

EGS 9, Plate 1 – Geologic Map of Maury County, Tennessee, with explanatory text, compiled by Robert A. Miller (1983).
Scale 1:100,000 (1 inch = 1.6 miles).
Prepared in cooperation with the U.S. Geological Survey.

EGS 9, Plate 2 – Mineral Resources Map of Maury County, Tennessee, with explanatory text, compiled by Robert A. Miller (1983).
Scale 1:100,000 (1 inch = 1.6 miles).
Prepared in cooperation with the U.S. Geological Survey.

EGS 9, Plate 3 – Flood-Prone Areas Map of Maury County, Tennessee, with explanatory text, compiled by Robert A. Miller (1983).
Scale 1:100,000 (1 inch = 1.6 miles).
Prepared in cooperation with the U.S. Geological Survey.

EGS 9, Plate 4 – Unstable Materials Map of Maury County, Tennessee, with explanatory text and table, compiled by Robert A. Miller (1983).
Scale 1:100,000 (1 inch = 1.6 miles).
Prepared in cooperation with the U.S. Geological Survey.

EGS 9, Plate 5 – Sinkhole Map of Maury County, Tennessee, with explanatory text, compiled by Robert A. Miller (1983).
Scale 1:100,000 (1 inch = 1.6 miles).
Prepared in cooperation with the U.S. Geological Survey.

RTN 1-7, Number 1:
- Administrative Report of the State Geologist, 1916, 21 p., by A.H. Purdue.
- By-Product Coke Oven Opportunities in Tennessee, 14 p., by A.H. Purdue.
- Recent Oil Developments at Glenmary, Tennessee, 4 p., by L.C. Glenn.
- Properties of Molding Sand, 2 p., by Robert E. Wendt.
RTN 1-7, Number 2:
- The Gravels of West Tennessee Valley, 35 p., by Bruce Wade.
- The Boundary Lines of Tennessee, 15 p., by Park Marshall.
- The Glenmary Oil Field, 4 p., by A.H. Purdue.
RTN 1-7, Number 3:
- Marketing Woodlot Products in Tennessee, 85 p., by W.D. Starrett.
RTN 1-7, Number 4:
- Structure of the Waynesboro Quadrangle with Special Reference to Oil & Gas, 21 p., by H.D. Miser.
- General Oil and Gas Conditions of the Highland Rim Area in Tennessee, 9 p., by A.H. Purdue.

RTN 1-8, Number 1:
- Dr. A. H. Purdue, 4 p., by L.C. Glenn.
- The Climate of Tennessee, 39 p., by Roscoe Nunn.
- Manganese Deposits of Bradley County, 2 p., by A.H. Purdue.
- Barite Deposits of the Sweetwater District, East Tennessee, 35 p., by C.H. Gordon.
RTN 1-8, Number 2:
- Announcement: Election of the New State Geologist, 1 p., by L.C. Glenn.
- Report of the Caves of the Eastern Highland Rim & Cumberland Mountains, 54 p., by T.L. Bailey.
- Discussion of the Chemical Analyses of the Cave Deposits of Tennessee, 4 p., by L.C. Glenn.
RTN 1-8, Number 3:
- Manganese Deposits of East Tennessee: Part I, 57 p., by G.W. Stose and F.C. Schrader.
- War Work, 3 p., by W.A. Nelson.
- The Glenmary Oil Field, 9 p., by L.C. Glenn.
RTN 1-8, Number 4:
- Manganese Deposits of East Tennessee: Part II, 90 p., by G.W. Stose and F.C. Schrader.

RTN 1-9, Number 1:
- Administrative Report of the State Geologist, 1918, 20 p., by W.A. Nelson.
- Forests, Gullies, and Reconstruction, 9 p., by R.S. Maddox.
- The Mining and Preparation of Manganese Ores in Tennessee, 16 p., by W.R. Crane.
- Preparation of Manganese Ores, 12 p., by W.R. Crane and E.R. Eaton.
- The Coal Pyrite Resources of Tennessee and Tests on their Availability, 11 p., by E.A. Holbrook and W.A. Nelson.
RTN 1-9, Number 2:
- Ball Clays of West Tennessee, 102 p., by R.A. Schroeder.
- Characteristic Properties of Ball and Plastic Refractory Bond Clays, 11 p., by C.W. Parmelee.

OGC 1: Oil and Gas in Middle Tennessee, size 27x30 inches, by Kendall E. Born (1943).
Generalized map (scale 1 inch = 15 miles) showing locations of pools by physiographic provinces, columnar section showing stratigraphic position of producing horizons, tables of oil and gas data by pools, and a brief history of development.

OGC 2: Oil and Gas in Northern Cumberland Plateau, Tennessee, by Kendall E. Born and William N. Lockwood (1945).
Includes maps of fields/pools and well locations, structure contour maps, a stratigraphic column, two cross sections based on well data, a graph showing the stratigrpahic distribution of oil and gas, a table of oil and gas data, and a history of oil and gas development in the northern Cumberland Plateau.

OGC 4: Subsurface Stratigraphy and Structure of the Pre-Trenton Ordovician and the Upper Cambrian Rocks of Central Tennessee, size 36x55 inches (each sheet), by Ray Bentall and Jack B. Collins (1945).
Discussion of the Stones River and Upper Cambrian (Knox dolomite group) strata. Lines of columnar stratigraphic sections, structural contour maps (scale 1 inch = 16 miles; contour interval 100 feet) on top of the Carters Limestone and on top of rocks of Beekmantown age; isopach maps (scale 1 inch = 16 miles; isopach interval 50 feet) of the Stones River group, Wells Creek dolomite, and combined Stones River and Wells Creek strata; correlation chart and table of subsurface and oil and gas data from wells drilled into rocks of Beekmantown age. Set of two sheets.
Prepared in cooperation with U.S. Geological Survey.
An interpretation of seismic cross sections in the Valley and Ridge of Eastern Tennessee. Data useful in assessing hydrocarbonate potential of this area. Charts complement the report by Tegland (See Bulletin 78).

OGC 6: Oil and Gas Seismic Investigations, Series 1, Sheet 1, approx. 34 x 50 inches, by Robert C. Milici, Leonard D. Harris, and Anthony T. Statler (1979).

OGC 6: Oil and Gas Seismic Investigations, Series 1, Sheet 2, approx. 41 x 54 inches, by Robert C. Milici, Leonard D. Harris, and Anthony T. Statler (1979).

Pennsylvanian Geology of the Cumberland Plateau, 21p., 15 pls., size 12x26 inches, by C.W. Wilson, Jr., J.W. Jewell, and E.T. Luther (1956).
Detailed stratigraphy, structure, and economic geology. Illustrations include 7 reference stratigraphic sections; a composite stratigraphic section; 4 geologic maps of the area (in color; scale: 1 inch = 3 miles); isopach and sand-distribution maps; structural features and structure contour maps.

Subsidence and Sinkholes in East Tennessee—A Field Guide to Holes in the Ground, 9 p., 15 figures, by Martin S. Kohl (1999; Second Edition 2001).
Describes various types of earth subsidence and karst-related features that commonly occur in East Tennessee.

How to Pan for Gold, 2 p., 4 figures, by Robin C. Hale (1999).
Shows where and why gold occurs and explains the author’s method of panning. For the inexperienced enthusiast.

Fossil Hunting in Nashville, 2 p., 9 figures, compiled by Nancy Stetten with illustrations by Al Hulstrunk (2014).
A brochure prepared for the Seventeenth Annual Celebration of Earth Science Week, October 12-18, 2014. Describes nine sites in and around Nashville where Ordovician fossils can be collected. Includes line drawings of the more common species.
Contact | Telephone | |
---|---|---|
Maps and Publications Sales | (865) 594-5460 | geology.sales@tn.gov |
This Page Last Updated: July 1, 2025 at 11:46 AM