Example Drawings
The drawings listed below are only examples of what a designer may specify for a project. Each one would need to be updated and editted to be used in a site specific context.
- 3.3.2.1 Bank Protection
- 3.3.2.2 Bioengineered Soil Bank Stabilization
- 3.3.2.3 Temporary Instream Diversion
- 3.3.2.4 Temporary Stream Diversion
- 3.3.2.5 Temporary Construction Ford
- 3.3.2.6 Temporary Stream Crossing
- 3.3.3.4 Tree Preservation
- 3.3.4 Construction Exit
- 3.4.2 Concrete Washout
- 3.4.3 Tire Washing
- 4.2.1 Diversion Berm or Dike
- 4.2.5 Slope Drain
- 4.2.6.1 Channel and Swale Stabilization
- 4.2.6.3 Gravel – Access Road Stabilization
- 4.2.6.6 Rolled Erosion Control Products
- 4.2.6.7 Sod
- 4.3.1 Benching and Terracing
- 4.3.3 Check Dams and Enhanced Check Dams
- 4.3.5 Level Spreader
- 4.3.6 Riprap Apron
- 4.3.8 Surface Roughening
- 4.4.1 Brush Fabric Barrier
- 4.4.2 Filter Berm: Slash Mulch
- 4.4.3 Filter Strip
- 4.4. Inlet Protection: Area
- 4.4.5 Inlet Protection: Curb
- 4.4.6 Inlet Protection: Filter Rings for Culverts
- 4.4.7 Temporary Sediment Basin
- 4.4.8 Sediment Trap
- 4.4.9 Sediment Tubes and Socks
- 4.4.10 Silt Fence and Associated Variants
- 4.4.11 Weep Berms
- 4.4.12.1.1 Porous Baffles
- 4.4.12.1.2 Solid Baffles
- 4.4.12.2.1 Perforated Riser Pipe
- 4.4.12.2.2 Skimmer
- 4.4.12.3 Dewatering Structure
- 4.4.12.4 Floating Turbidity Curtain
- 4.4.12.6 Sediment Filter Bag
Additional example drawings can be found on the Tennessee Department of Transportation's (TDOT) website.