Skip to Main Content

Standard Roadway Drawings

Revised: August 6, 2019

TDOT Standard Drawings Sections

Standard Drawings are divided into eight sections, which are further divided into subsections for specific drawings. Select the desired section from the list below.

Roadway Design Standards Standard Abbreviations and Legends | Typical Section and Design Criteria | RD11 Typical Section and Design Criteria | RD11 Slope Developement and Runoff Lenghts | RD11 Intersection Sight Distance | Slope Development | Intersection Sight Distance | Underdrains
Pipe Culverts and Endwalls Pipe Culverts & Flume | Safety Cross Drain Endwalls | Safety Side Drain Endwalls | Protected Endwalls
Catch Basins and Manholes Catch Basins | Junction Boxes | Manholes | Spring Drain Boxes | Slotted & Trench Drains
Natural Stream Design Deflectors, Vanes & Energy Dissipators
Roadway and Pavement Appurtenances Concrete Pavement | Intersections | Curbs | Walls
Multimodal Curb Ramps | Pavement Marking | Safety Rail | Sidewalk | Typical Section
Safety Design and Fences Clear Zone & Safety Plans | Cable Barriers | Crash Cushions | Guardrail Details | Guardrail Terminals | Guardrail Anchors | Concrete Median Barrier | Fence & Right-of-Way Markers | Guardrail Maintenance
Design - Traffic Control Pavement Markings | Work Zones
Erosion Prevention and Sediment Control Dewatering Devices | Slope Devices | Ditch Devices | Inlet Protection | Detaining Devices | In-Stream Devices

 

Related Documents

INSTRUCTIONAL BULLETIN NO. 12-10 (pdf)
(There will no longer be standard drawings printed with plans.)

INDEX OF STANDARD DRAWINGS (359 KB pdf)

ALL STANDARD DRAWINGS  (195 MB zip)
(Revised: 03/12/2019 2:16AM)

 

 

If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402
TDOT.CADDSupport@tn.gov

This Page Last Updated: March 1, 2018 at 11:57 AM