Most Cited for Manufacturing NAICS Codes 31, 32 & 33
January 2025-December 2025
Total violations for the year: 1,262
| Rank | Standard | Section Title | Violations | Description |
|---|---|---|---|---|
| 1 | 1910.1200(h)(1) | Hazard Communication Information and Training |
60 | Lack of effective information and training on hazardous chemicals |
| 2 | 1910.1200(e)(1) | Hazard Communication Written Program |
45 | No written hazard communication program developed, implemented or maintained at each workplace |
| 3 | TCA 50-3-105(1) | General Duty Clause | 34 | Failure to provide a workplace free from recognized hazards likely to cause death or serious physical harm. |
| 4 | 1910.1200(f)(6)(ii) | Hazard Communication Workplace Labeling |
31 | In house chemical containers did not have identity of chemical & words, pictures, symbols, or hazard statements |
| 5 | 1910.212(a)(1) | Machine Guarding General Requirements |
30 | One or more methods of machine guarding not provided to protect employees from hazards created by point of operation, ingoing nip points, rotating parts, flying chips, or sparks |
| 6 | 1910.133(a)(1) | Personal Protective Equipment Eye and Face Protection |
22 | Appropriate eye and/or face protection was not used |
| 7 | 1910.1200(g)(1) | Hazard Communication Safety Data Sheets |
22 | A safety data sheet was not provided in the workplace for each hazardous chemical used |
| 8 | 1910.147(c)(4)(i) | Lockout/Tagout Energy Control Procedures |
20 | Energy control procedures were not developed, documented, and/or utilized |
| 9 | 1910.151(b) | Medical and First Aid | 19 | In the absence of an infirmary, clinic, or hospital in near proximity to the workplace which is used for the treatment of all injured employees, no personnel adequately trained to render first aid Adequate first aid supplies were not readily available |
| 10 | 1910.303(b)(2) | Electrical Equipment Installation and Use |
18 | Listed or labeled equipment was not installed and used in accordance with any instructions included in the listing or labeling |
| 11 | 1910.151(c) | Medical and First Aid | 17 | When exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use |
| 12 | 1910.242(b) | Hand and Portable Power Tools and Other Equipment Compressed Air |
17 | Compressed air used for cleaning was not reduced to less than 30 PSI |
| 13 | TDLWD Rule 0800-01-03-.05-(1)(a)2 |
Recordkeeping & Reporting | 17 | Employee in-patient hospitalization, loss of an eye, or amputation was not reported to TOSHA within 24 hours |
| 14 | 1910.157(c)(1) | Fire Protection Portable Fire Extinguishers |
16 | Portable fire extinguishers were not provided, mounted, located, or identified so that they were readily accessible to employees |
| 15 | 1910.28(b)(1)(i) | Walking-Working Surfaces Unprotected Sides and Edges |
15 | Employees on walking-working surfaces with unprotected sides or edges that were four feet or more above a lower level were not provided any fall protection |
| 16 | 1910.1200(g)(8) | Hazard Communication Safety Data Sheets |
15 | Safety data sheets for each hazardous chemical were not readily accessible to employees |
| 17 | TDLWD Rule 0800-01-03-.03(27)(b)1 |
Recordkeeping Forms and Recording Criteria | 15 | The log of all recordable work-related injuries and illnesses (OSHA Form 300 or equivalent) was not completed in detail as required by the rule |
| 18 | 1910.134(e)(1) | Respiratory Protection Medical Evaluation |
14 | A medical evaluation was not provided to determine employee's ability to use a respirator |
| 19 | 1910.138(a) | Personal Protective Equipment Hand Protection |
14 | Lack of appropriate hand protection when employees' hands are exposed to hazards |
| 20 | 1910.212(a)(3)(ii) | Machine Guarding Point of Operation |
14 | The point of operation on machines that exposed employees to injury was not properly guarded |