T-M-17
PAVEMENT MARKING DETAILS FOR ROUNDABOUTS
(Click image to open PDF)
Latest Revision Note
05/04/2022 REDREW THE TYPICAL PAVEMENT MARKING DRAWING AND ADDED GENERAL NOTES (B), (C) AND (D).
Related Standard Drawings
| DRAWING | DESCRIPTION | REMARKS |
|---|---|---|
| MM-PM-5 | BICYCLE LANE LINE ON DEPARTURE DOTTED THROUGH TAPER AND SOLID WHEN FULL WIDTH IS AVAILABLE | SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANES AT INTERSECTIONS |
| RD18-RSD-1 | SIGHT DISTANCE FOR URBAN AND RURAL ROUNDABOUTS | FOR SIGHT DISTANCE FOR SINGLE-LANE AND MULTI LANE ROUNDABOUTS |
| RD18-RTS-1 | DESIGN STANDARDS FOR SINGLE LANE URBAN AND RURAL ROUNDABOUTS | FOR DESIGN STANDARDS FOR SINGLE-LANE ROUNDABOUTS |
| RD18-RTS-2 | DESIGN STANDARDS FOR MULTI-LANE URBAN AND RURAL ROUNDABOUTS | FOR DESIGN STANDARDS FOR MULTILANE ROUNDABOUTS |
| RD18-RTS-3 | STANDARD CONSTRUCTION DETAILS FOR ROUNDABOUTS | FOR STANDARDS CONSTRUCTION DETAILS FOR ROUNDABOUTS |
| T-M-4 | STANDARD INTERSECTION PAVEMENT MARKINGS | FOR STANDARD INTERSECTION PAVEMENT MARKINGS |
| T-M-4A | STANDARD UNSIGNALIZED MID-BLOCK CROSSING | FOR STANDARD INTERSECTION PAVEMENT MARKINGS |
Related Item Numbers
| ITEM NO. | U/M | DESCRIPTION | REMARKS |
|---|---|---|---|
Archived Standard Drawings
| DATES OF EACH ARCHIVED DRAWINGS ( THE INITIAL STANDARD DRAWING IS BOLD ) |
|---|
| 07-02-2012 | 02-20-2014 | 06-28-2019 | 05-04-2022 |
If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402
TDOT.CADDSupport@tn.gov
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402
TDOT.CADDSupport@tn.gov
This Page Last Updated: July 14, 2022 at 12:52 PM