Skip to Main Content

Find COVID-19 Information and Resources

T-M-16

RUMBLE STRIPE INSTALLATION LAYOUT
T-M-16

(Click image to open PDF)

Related Standard Drawings

DRAWING DESCRIPTION REMARKS
MM-PM-2
SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANE OR ROUTES FOR PAVEMENT MARKING AND SIGNING
T-M-1 DETAILS OF PAVEMENT MARKINGS FOR CONVENTIONAL ROADS AND MARKING ABBREVIATIONS FOR SPACING
T-M-15 ASPHALT SHOULDER RUMBLE STRIP INSTALLATION DETAILS FOR INTERSTATE AND ACCESS CONTROLLED ROUTES WHEN RUMBLE STRIPES ARE INSTALLED ON ACCESS CONTROLLED ROUTES, THE RUMBLE STRIPE IS TO BE INSTALLED CONTINUOUSLY WITHOUT THE 15’ GAP. RUMBLE STRIPE WIDTH SHALL BE 16" WIDE AS DETAILED
T-M-15A ASPHALT SHOULDER RUMBLE STRIP INSTALLATION DETAILS FOR NON-ACCESS CONTROLLED RURAL ROUTES FOR RUMBLE STRIP DETAILS
T-M-16A ASPHALT CENTERLINE RUMBLE STRIPE FOR MILLED-IN RUMBLE STRIPE DETAILS

Related Item Numbers

ITEM NO. U/M DESCRIPTION
411-12.03 L.M. SCORING FOR RUMBLE STRIPE (NON-CONTINUOUS) (8IN WIDTH)
411-12.04 L.M. SCORING FOR RUMBLE STRIPE (NON-CONTINUOUS) (4IN WIDTH)
716-12.02 L.M. ENHANCED FLATLINE THERMOPLASTIC PAVEMENT MARKING (6 IN LINE)
716-14.02 L.M. PROFILED THERMO PVMT MRKNG AUDIBLE (6IN)

Archived Standard Drawings

DATES OF EACH ARCHIVED DRAWINGS ( THE INITIAL STANDARD DRAWING IS BOLD )
12-01-2009 | 11-01-2011 | 12-01-2014 | 08-02-2018 | 06-28-2019 | 02-03-2020
If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402

This Page Last Updated: March 12, 2020 at 2:30 PM