Skip to Main Content

Find COVID-19 Information and Resources

MM-SW-1

DETAILS FOR CONCRETE SIDEWALK
MM-SW-1

(Click image to open PDF)

Related Standard Drawings

DRAWING DESCRIPTION REMARKS
MM-BPR-1 BIKE AND PEDESTRIAN SAFETY RAIL FOR PEDESTRIAN RAIL REQUIREMENTS
MM-CR-SERIES CURB RAMP SECTION FOR CURB RAMP DETAILS
MM-PM-1 SIGNING AND PAVEMENT MARKINGS AT INTERSECTION CROSSINGS FOR SHARED-USE PATHS FOR BIKE LANE/ROUTE PAVEMENT MARKINGS
MM-PM-2 SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANE OR ROUTES FOR BIKE LANE/ROUTE PAVEMENT MARKINGS
MM-PM-3 SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANES ON URBAN ROADWAYS FOR BIKE LANE/ROUTE PAVEMENT MARKINGS
MM-PM-4 SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANES
FOR BIKE LANE/ROUTE PAVEMENT MARKINGS
MM-PM-5 SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANES AT INTERSECTIONS FOR BIKE LANE/ROUTE PAVEMENT MARKINGS
MM-SW-2 ALTERNATE DETAILS FOR CONCRETE SIDEWALK (REHABILITATION) FOR ALTERNATE DETAILS FOR CONCRETE SIDEWALK (REHABILITATION)
MM-TS-2 LATERAL OFFSETS FOR SIDEWALK AND SHARED USE PATH FOR PEDESTRIAN FACILITY LATERAL OFFSETS
MM-TS-3 SEPARATED SHARED USE PATH TYPICAL SECTIONS FOR SHARED USE TYPICAL SECTIONS
RP-D-15 DETAILS OF STANDARD CONCRETE DRIVEWAYS FOR CONCRETE DRIVEWAYS
RP-D-16 DETAILS OF LOWERED STANDARD CONCRETE DRIVEWAYS FOR CONCRETE DRIVEWAYS
RP-SC-1 6" SLOPING CONCRETE CURBS AND CONCRETE CURBS AND GUTTERS FOR 6" SLOPING CONCRETE CURBS AND CONCRETE CURBS AND GUTTERS
RP-VC-10 VERTICAL CONCRETE CURBS AND CONCRETE CURBS AND GUTTERS FOR VERTICAL CONCRETE CURB AND CONCRETE CURBS AND GUTTER DETAILS
RP-VC-11 VERTICAL CONCRETE CURBS AND GUTTERS 6" AND 7' DEPTH FOR VERTICAL CONCRETE CURB AND CONCRETE CURBS AND GUTTER DETAILS
S-PL-6 SAFETY PLAN SAFETY HARDWARE PLACEMENT ON OUTSIDE EDGE FOR GUARDRAIL PLACEMENT
T-M-4 STANDARD INTERSECTION PAVEMENT MARKINGS FOR CROSS WALK MARKING
     

Related Item Numbers

ITEM NO. U/M DESCRIPTION REMARKS
701-01.01 S.F. CONCRETE SIDEWALK (4")  
701-01.02 S.F. CONCRETE SIDEWALK (6")  
       

Archived Standard Drawings

DATES OF EACH ARCHIVED DRAWINGS ( THE INITIAL STANDARD DRAWING IS BOLD )
01-07-2019 | 06-28-2019

If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402
TDOT.CADDSupport@tn.gov

This Page Last Updated: December 19, 2019 at 2:35 PM