Skip to Main Content

T-M-16

ASPHALT SHOULDER RUMBLE STRIPE INSTALLATION DETAILS FOR NON-ACCESS CONTROLLED RURAL ROUTES
T-M-16

(Click image to open PDF)

Related Standard Drawings

DRAWING DESCRIPTION REMARKS
T-M-11 SIGNING AND PAVEMENT MARKINGS FOR BICYCLE LANES OR ROUTES FOR PAVEMENT MARKING AND SIGNING
T-M-15 ASPHALT SHOULDER RUMBLE STRIP INSTALLATION DETAILS FOR INTERSTATE AND ACCESS CONTROLLED ROUTES WHEN RUMBLE STRIPES ARE INSTALLED ON ACCESS CONTROLLED ROUTES, THE RUMBLE STRIPE IS TO BE INSTALLED CONTINUOUSLY WITHOUT THE 15’ GAP. RUMBLE STRIPE WIDTH SHALL BE 16" WIDE AS DETAILED ON STD. DWG. T-M-15
     

Related Item Numbers

ITEM NO. U/M DESCRIPTION
411-12.03 L.M. SCORING FOR RUMBLE STRIPE (NON-CONTINUOUS) (8IN WIDTH)
411-12.04 L.M. SCORING FOR RUMBLE STRIPE (NON-CONTINUOUS) (4IN WIDTH)
716-14.01 L.M. PROFILED THERMO PVMT MRKNG AUDIBLE (4IN)
716-14.02 L.M. PROFILED THERMO PVMT MRKNG AUDIBLE (6IN)

Archived Standard Drawings

DATES OF EACH ARCHIVED DRAWINGS ( THE INITIAL STANDARD DRAWING IS BOLD )
12-01-2009 | 11-01-2011 | 12-01-2014 | 08-02-2018
If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1200 James K. Polk Building
Nashville, TN 37243-1402

This Page Last Updated: October 10, 2018 at 3:55 PM