Section of I-440 in Nashville Closed This Weekend for Concrete Repairs
Section of I-440 Closed This Weekend for Concrete Repairs
Ninth of Ten Weekend Closures begins Friday, September 13th at 8:00 p.m.
NASHVILLE – Tennessee Department of Transportation contract crews will completely close I-440 eastbound from the I-65 junction in Nashville to the I-24 junction, including the on and off ramps at Nolensville Road this weekend. This closure will be necessary for the grinding of the I-440 mainline, joint sealing, and bridge overlay. I-440 Eastbound between I-65 and I-24 will be closed starting Friday, September 13th at 8 p.m. through Monday, September 16th at 5:00 a.m.
New!!! -- Photos of the concrete replacement process can be found here:
High definition video of the concrete replacement process can be found here:
Also, you will notice from our TDOT traffic cameras that an additional lane of travel on I-440 Eastbound between I-65 and I-24 is now open. Opening this extra lane has helped relieve congestion during the morning and evening rush hour.
The repairs are part of a $9.7 million project to widen this stretch of I-440 Eastbound. A total of ten weekend closures will allow the concrete work to be completed on an accelerated schedule. Otherwise, repairs would require lane closures over a period of several months. During the weekend closures, crews will jackhammer and remove large sections of deteriorating concrete as much as a foot deep. Once the new concrete is poured, it will have to harden for several hours. The travel lanes will then be re-striped before reopening to traffic.
The final interstate closure is tentatively planned for October 11th – October 13th.
*All work is weather dependent and will be rescheduled in the event of rain or severe weather.
Detours are as follows:
From the North, take I-65 South to the I-65/I-40 split over to I-24
From the South, take I-65 North to go to I-24/I-40 or take the Harding Place exit over to I-24
From the West, stay on I-40 East to the I-65/I-40 split over to I-24
If you are driving on I-440 Eastbound, drivers will be advised to take I-65 North over to I-24 or I-40.
Media -- A detour map is provided with this release.
More than 106,000 vehicles travel the 7.66 mile I-440 corridor each day. The interstate connector was completed in 1987. The current improvement project is tentatively scheduled to be complete in November 2013.
TDOT will use its overhead Dynamic Message Signs to direct motorists around the closure. Drivers are advised to be alert and follow the posted directions. Law enforcement officers will be on-site in the work zone to provide traffic control as the work is being completed. TDOT also asks drivers to use caution, reduce their speed and be alert to changing traffic conditions in work zones across the state.
For more information on TDOT construction project activity visit the TDOT SmartWay web site at www.tn.gov/tdot/tdotsmartway/. Travelers can also dial 511 from any land-line or cellular phone for travel information or can follow us on Twitter at www.twitter.com/TN511 for statewide travel information or www.twitter.com/Nashville511 for traffic information in the Nashville area.
Android and iPhone users can download TDOT’s SmartWay Mobile App to assist them in navigating Tennessee highways. The app provides up-to-the-minute customized traffic information and enables the user to access TDOT’s SmartWay cameras, messages displayed on overhead Dynamic Message Signs, and information on construction related lane closures and incidents on interstates and state routes. The TDOT SmartWay App is free and available for download in the Apple App Store and Play Store for Android.
As always, drivers are reminded to use all motorist information tools wisely and Know Before You Go! by checking travel conditions before leaving for their destination. Drivers should never tweet, text or talk on a cell phone while behind the wheel.