State Route 115 (US 129) Alcoa Highway Maloney Road to Woodson DriveKnox County
The new Maloney Road Interchange is open to vehicular and pedestrian traffic.
The project along State Route 115 (US 129/Alcoa Highway), from south of Maloney Road to Woodson Drive in Knox County, includes widening the roadway for approximately 1.4 miles. Improvements follow the existing alignment and consist of widening the existing roadway to six lanes (three lanes in each direction). A new interchange will be also constructed at Maloney Road.
This project is part of a larger effort to reconstruct and widen Alcoa Highway from State Route 35 (Hall Road) to Cherokee Trail in Blount and Knox Counties. Due to the significant size of the overall project, the proposed improvements have been separated into seven smaller sections or phases. To read more about all improvements for the corridor, visit the Alcoa Highway project website.
Purpose and Need
Alcoa Highway is a major connection between the City of Knoxville and the Cities of Alcoa and Maryville, as well as providing a route to McGhee Tyson Airport and the Great Smoky Mountains National Park.
The proposed improvements for the heavily-traveled corridor are intended to increase capacity, correct roadway deficiencies, and reduce crashes in order to address transportation needs by improving the safety, efficiency, and operation of the roadway.
Alcoa Highway from Maloney Road to Woodson Drive is one of seven sections that will improve the corridor in Blount and Knox Counties. (See Alcoa Highway project website)
The section between Maloney Road and Woodson Drive will follow the existing alignment, widening the roadway to six lanes (three in each direction) with a concrete median barrier wall.
Interchanges and frontage roads will provide safe access to other local roads, local businesses, and neighborhoods.
A new interchange will be constructed at Maloney Road, and three bridges will be constructed to provide connection to the new frontage roads that will access Woodson Drive, Montlake Drive, Mount Vernon Drive, and Maloney Drive.
Roundabouts will be installed at East Maloney Road, West Maloney Road, and Montlake Drive.
A greenway will be constructed along the southbound section, from Montlake Drive to south of Alcoa Way Shopping Center and will eventually provide a connection between the Knoxville and Blount County Greenways.
bridge & frontage road construction near Mt Vernon Drive & Bunker Hill Road - September 2020
frontage road construction, connecting Montlake Drive & Barber Hill Road - September 2020
bridge view, looking northbound toward Montlake Drive & Woodson Drive - September 2020
To receive email updates on improvements to Alcoa Highway, fill out and submit the form below.