Identification_Information: Citation: Citation_Information: Originator: Federal Emergency Management Agency Publication_Date: 20080318 Title: TNMAP.SDE.MONTGOMERY_COUNTY_S_BFE Geospatial_Data_Presentation_Form: vector digital data Publication_Information: Publication_Place: Washington, DC Publisher: Federal Emergency Management Agency Other_Citation_Details: Metadata_File_Name:47125C_20080318_metadata.txt Online_Linkage: Server=10.172.194.69; Service=5151; Database=TNMap; User=sde; Version=sde.DEFAULT Larger_Work_Citation: Citation_Information: Originator: Federal Emergency Management Agency Publication_Date: 20080318 Title: FEMA CASE MICS_16195 Description: Abstract: The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). In addition to the preceding, required text, the Abstract should also describe the projection and coordinate system as well as a general statement about horizontal accuracy. Purpose: The FIRM is the basis for floodplain management, mitigation, and insurance activities for the National Flood Insurance Program (NFIP). Insurance applications include enforcement of the mandatory purchase requirement of the Flood Disaster Protection Act, which '... requires the purchase of flood insurance by property owners who are being assisted by Federal programs or by Federally supervised, regulated or insured agencies or institutions in the acquisition or improvement of land facilities located or to be located in identified areas having special flood hazards, ' Section 2 (b) (4) of the Flood Disaster Protection Act of 1973. In addition to the identification of Special Flood Hazard Areas (SFHAs), the risk zones shown on the FIRMs are the basis for the establishment of premium rates for flood coverage offered through the NFIP. The DFIRM Database presents the flood risk information depicted on the FIRM in a digital format suitable for use in electronic mapping applications. The DFIRM database is a subset of the Digital FIS database that serves to archive the information collected during the FIS. Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20070810 Currentness_Reference: MIP submission Date Status: Progress: Complete Maintenance_and_Update_Frequency: Unknown Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -87.606406 East_Bounding_Coordinate: -87.206225 North_Bounding_Coordinate: 36.643029 South_Bounding_Coordinate: 36.330722 Keywords: Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: hydrology Theme_Keyword: environment Theme_Keyword: inlandWaters Theme_Keyword: structure Theme_Keyword: transportation Theme_Keyword: elevation Theme: Theme_Keyword_Thesaurus: FEMA NFIP Topic Category Theme_Keyword: DFIRM Theme_Keyword: FIRM Theme_Keyword: FEMA Flood Hazard Zone Theme_Keyword: DFIRM Database Theme_Keyword: Special Flood Hazard Area Theme_Keyword: Digital Flood Insurance Rate Map Theme_Keyword: CBRS Theme_Keyword: Coastal Barrier Resources System Theme_Keyword: Riverine Flooding Theme_Keyword: Coastal Flooding Theme_Keyword: NFIP Theme_Keyword: Base Flood Elevation Theme_Keyword: SFHA Theme_Keyword: Flood Insurance Rate Map Theme_Keyword: Floodway Place: Place_Keyword_Thesaurus: None Place_Keyword: REGION 04 Place_Keyword: STATE TN Place_Keyword: COUNTY MONTGOMERY COUNTY Place_Keyword: COUNTY-FIPS 125C Place_Keyword: COMMUNITY MONTGOMERY COUNTY Place_Keyword: FEMA-CID 470136 Place_Keyword: COMMUNITY CLARKSVILLE, CITY OF Place_Keyword: FEMA-CID 470137 Access_Constraints: Restricted Use_Constraints: The hardcopy FIRM and DFIRM and the accompanying FISs are the official designation of SFHAs and Base Flood Elevations (BFEs) for the NFIP. For the purposes of the NFIP, changes to the flood risk information published by FEMA may only be performed by FEMA and through the mechanisms established in the NFIP regulations (44 CFR Parts 59-78). These digital data are produced in conjunction with the hardcopy FIRMs and generally match the hardcopy map exactly. However the hardcopy flood maps and flood profiles are the authoritative documents for the NFIP. Acknowledgement of FEMA would be appreciated in products derived from these data. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: Federal Emergency Management Agency Contact_Address: Address_Type: mailing Address: 500 C Street, S.W. City: Washington State_or_Province: District of Columbia Postal_Code: 20472 Country: USA Contact_Voice_Telephone: 1-800-358-9616 Contact_Electronic_Mail_Address: miphelp@mapmodteam.com Native_Data_Set_Environment: Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.2.2.1350 Cross_Reference: Citation_Information: Originator: Federal Emergency Management Agency Publication_Date: 20080318 Title: Flood Insurance Rate Map, MONTGOMERY COUNTY, TENNESSEE (AND INCORPORATED AREAS) Geospatial_Data_Presentation_Form: Map Publication_Information: Publication_Place: Washington, DC Publisher: Federal Emergency Management Agency Online_Linkage: http://hazards.fema.gov Cross_Reference: Citation_Information: Originator: Federal Emergency Management Agency Publication_Date: 20080318 Title: Flood Insurance Study, MONTGOMERY COUNTY, TENNESSEE (AND INCORPORATED AREAS) Geospatial_Data_Presentation_Form: Document Publication_Information: Publication_Place: Washington, DC Publisher: Federal Emergency Management Agency Online_Linkage: http://hazards.fema.gov Cross_Reference: Citation_Information: Originator: Federal Emergency Management Agency Publication_Date: 20080318 Title: Raster DFIRM, MONTGOMERY COUNTY, TENNESSEE (AND INCORPORATED AREAS) Geospatial_Data_Presentation_Form: Raster digital data Publication_Information: Publication_Place: Washington, DC Publisher: Federal Emergency Management Agency Online_Linkage: http://hazards.fema.gov Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: The DFIRM Database consists of community based vector files and associated attributes produced in conjunction with the hard copy FEMA FIRM. The published effective FIRM and DFIRM maps are issued as the official designation of the SFHAs. As such they are adopted by local communities and form the basis for administration of the NFIP. For these purposes they are authoritative. Provisions exist in the regulations for public review, appeals and corrections of the flood risk information shown to better match real world conditions. As with any engineering analysis of this type, variation from the estimated flood heights and floodplain boundaries is possible. Details of FEMA's requirements for the FISs and flood mapping process that produces these data are available in the Guidelines and Specifications for Flood Hazard Mapping Partners. Attribute accuracy was tested by manual comparison of source graphics with hardcopy plots and a symbolized display on an interactive computer graphic system. Independent quality control testing of FEMA's DFIRM database was also performed. To obtain more detailed information in areas where Base Flood Elevations (BFEs) and/or floodways have been determined, users are encouraged to consult the Flood Profiles and Floodway Data and/or Summary of Stillwater Elevations tables contained within the FIS report that accompanies this DFIRM database. Users should be aware that BFEs shown in the S_BFE table represent rounded whole-foot elevations. These BFEs are intended for flood insurance rating purposes only and should not be used as the sole source of flood elevation information. Accordingly, flood elevation data presented in the FIS report must be used in conjunction with the FIRM for purposes of construction and/or floodplain management. The 1-percent-annual-chance water-surface elevations shown in the S_XS table match the regulatory elevations shown in the FIS report. Logical_Consistency_Report: When FEMA revises an FIS, adjacent studies are checked to ensure agreement between flood elevations at the boundaries. Likewise flood elevations at the confluence of streams studied independently are checked to ensure agreement at the confluence. The FIRM and the FIS are developed together and care is taken to ensure that the elevations and other features shown on the flood profiles in the FIS agree with the information shown on the FIRM. However, the elevations as shown on the FIRM are rounded whole-foot elevations. They must be shown so that a profile recreated from the elevations on the FIRM will match the FIS profiles within one half of one foot. Completeness_Report: Data contained in the DFIRM Database files reflect the content of the source materials. Features may have been eliminated or generalized on the source graphic, due to scale and legibility constraints. With new mapping, FEMA plans to maintain full detail in the spatial data it produces. However, older information is often transferred from existing maps where some generalization has taken place. Flood risk data are developed for communities participating in the NFIP for use in insurance rating and for floodplain management. Flood hazard areas are determined using statistical analyses of records of river flow, storm tides, and rainfall; information obtained through consultation with the communities; floodplain topographic surveys; and hydrological and hydraulic analysis. Both detailed and approximate analyses are employed. Generally, detailed analyses are used to generate flood risk data only for developed or developing areas of communities. For areas where little or no development is expected to occur, FEMA uses approximate analyses to generate flood risk data. Typically, only drainage areas that are greater than one square mile are studied. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: The DFIRM Database consists of community based vector files and associated attributes produced in conjunction with the hardcopy FEMA FIRM. The published effective FIRM and DFIRM are issued as the official designation of the SFHAs. As such they are adopted by local communities and form the basis for administration of the NFIP. For these purposes they are authoritative. Provisions exist in the regulations for public review, appeals and corrections of the flood risk information shown to better match real world conditions. As with any engineering analysis of this type, variation from the estimated flood heights and floodplain boundaries is possible. Details of FEMA's requirements for the FISs and flood mapping process that produces these data are available in the Guidelines and Specifications for Flood Hazard Mapping Partners. Horizontal accuracy was tested by manual comparison of source graphics with hardcopy plots and a symbolized display on an interactive computer graphic system. Independent quality control testing of FEMA's DFIRM database was also performed. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: The DFIRM Database consists of community based vector files and associated attributes produced in conjunction with the hardcopy FEMA FIRM. The published effective FIRM and DFIRM maps are issued as the official designation of the SFHAs. As such they are adopted by local communities and form the basis for administration of the NFIP. For these purposes they are authoritative. Provisions exist in the regulations for public review, appeals and corrections of the flood risk information shown to better match real world conditions. As with any engineering analysis of this type, variation from the estimated flood heights and floodplain boundaries is possible. Details of FEMA's requirements for the FISs and flood mapping process that produces these data are available in the Guidelines and Specifications for Flood Hazard Mapping Partners. Vertical accuracy was tested by manual comparison of source graphics with hardcopy plots and a symbolized display on an interactive computer graphic system. Independent quality control testing of FEMA's DFIRM database was also performed. Lineage: Source_Information: Source_Citation: Citation_Information: Originator: Clarksville-Montgomery County GIS Publication_Date: 2006 Title: Political Boundaries Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Clarksville, TN Publisher: City of Clarksville/Montgomery County GIS Project Other_Citation_Details: The City Limit border was digitized from Hard copy Tax Maps by SDS Inc. under a contract with the state. Guidelines of parcel boundaries were used along with the 1":100' and 1":400' maps. The City Limit was then updated by the RPC using legal descriptions of annexation areas. The City Limit border was digitized from Hard copy Tax Maps by SDS Inc. under a contract with the state. Guidelines of parcel boundaries were used along with the 1":100' and 1":400' maps. The City Limit was then updated by the RPC using legal descriptions of annexation areas. Source_Scale_Denominator: 4800 Type_of_Source_Media: Digital Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 2006 Source_Currentness_Reference: Publication date Source_Citation_Abbreviation: BASE1 Source_Contribution: Spatial and attribute information for S_POL_AR and S_POL_LN. Source_Information: Source_Citation: Citation_Information: Originator: State of Tennessee Department of Finance and Administration GIS Department Publication_Date: 2003 Title: Digital Transportation Lines, Water Lines and Water Areas Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Nashville, TN Publisher: State of Tennessee Department of Finance and Administration GIS Department Other_Citation_Details: None Source_Scale_Denominator: 24000 Type_of_Source_Media: External hard drive Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 2003 Source_Currentness_Reference: Publication date Source_Citation_Abbreviation: BASE2 Source_Contribution: Spatial and attribute information for S_TRNSPORT_LN, S_WTR_LN, S_WTR_AR. Source_Information: Source_Citation: Citation_Information: Originator: State of Tennessee Department of Planning Publication_Date: 2000 Title: Political Boundaries Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Nashville, TN Publisher: Tennessee Department of Transportation Planning Division, Mapping Division Other_Citation_Details: None Source_Scale_Denominator: 24000 Type_of_Source_Media: Online - http://tngis.org/ Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 2000 Source_Currentness_Reference: Publication date Source_Citation_Abbreviation: BASE3 Source_Contribution: Spatial and attribute information for S_POL_LN, S_POL_AR (county boundary only). Source_Information: Source_Citation: Citation_Information: Originator: NOAA, National Geodetic Survey Publication_Date: 2004 Title: Permanent Benchmarks Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Silver Spring, MD Publisher: NOAA, National Geodetic Survey Other_Citation_Details: Geodetic data comprise the results of geodetic surveys to determine among other things, latitude, longitude, height, scale, and orientation control. The NGS' final product is the geodetic data sheet. Geodetic data sheets are comprehensive summaries of all the published information for a given geodetic reference point, including: the geographic position and/or height based on the current reference datum, condition of the survey mark when it was last visited, a description of where the point is located and how to reach it, and an explanation of the terms used in the data sheet. Source_Scale_Denominator: 24000 Type_of_Source_Media: Online - http://www.ngs.noaa.gov/ Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 2004 Source_Currentness_Reference: Ground conditions Source_Citation_Abbreviation: BASE4 Source_Contribution: Spatial and attribute information for permanent benchmarks. Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 1989 Title: National Hydrography Dataset Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Reston, VA Publisher: U.S. Geological Survey Other_Citation_Details: The National Hydrography Dataset (NHD) is a feature-based database that interconnects and uniquely identifies the stream segments or reaches that make up the nation's surface water drainage system. NHD data was originally developed at 1:100,000-scale and exists at that scale for the whole country. This high-resolution NHD, generally developed at 1:24,000/1:12,000 scale, adds detail to the original 1:100,000-scale NHD. (Data for Alaska, Puerto Rico and the Virgin Islands was developed at high-resolution, not 1:100,000 scale.) Local resolution NHD is being developed where partners and data exist. The NHD contains reach codes for networked features, flow direction, names, and centerline representations for areal water bodies. Reaches are also defined on water bodies and the approximate shorelines of the Great Lakes, the Atlantic and Pacific Oceans and the Gulf of Mexico. The NHD also incorporates the National Spatial Data Infrastructure framework criteria established by the Federal Geographic Data Committee. Source_Scale_Denominator: 24000 Type_of_Source_Media: Online - http://nhd.usgs.gov/ Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1989 Source_Currentness_Reference: Publication date Source_Citation_Abbreviation: BASE5 Source_Contribution: Spatial and attribute information for water features. Source_Information: Source_Citation: Citation_Information: Originator: State of Tennessee Department of Finance and Administration GIS Department Publication_Date: 2003 Title: Digital Transportation Lines, Water Lines and Water Areas Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Nashville, TN Publisher: State of Tennessee Department of Finance and Administration GIS Department Other_Citation_Details: None Source_Scale_Denominator: 24000 Type_of_Source_Media: External Hard Drive Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20070331 Source_Currentness_Reference: Calendar date Source_Citation_Abbreviation: BASE6 Source_Contribution: Spatial and attribute information for S_TRNSPORT_LN, S_WTR_LN, S_WTR_AR modified by Taylor Engineering, Inc. Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 1989 Title: National Hydrography Dataset Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Reston, VA Publisher: U.S. Geological Survey Other_Citation_Details: The National Hydrography Dataset (NHD) is a feature-based database that interconnects and uniquely identifies the stream segments or reaches that make up the nation's surface water drainage system. NHD data was originally developed at 1:100,000-scale and exists at that scale for the whole country. This high-resolution NHD, generally developed at 1:24,000/1:12,000 scale, adds detail to the original 1:100,000-scale NHD. (Data for Alaska, Puerto Rico and the Virgin Islands was developed at high-resolution, not 1:100,000 scale.) Local resolution NHD is being developed where partners and data exist. The NHD contains reach codes for networked features, flow direction, names, and centerline representations for areal water bodies. Reaches are also defined on water bodies and the approximate shorelines of the Great Lakes, the Atlantic and Pacific Oceans and the Gulf of Mexico. The NHD also incorporates the National Spatial Data Infrastructure framework criteria established by the Federal Geographic Data Committee. Source_Scale_Denominator: 3000 Type_of_Source_Media: Online - http://nhd.usgs.gov/ Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20070331 Source_Currentness_Reference: Calendar date Source_Citation_Abbreviation: BASE7 Source_Contribution: Spatial and attribute information for water features modified by Taylor Engineering, Inc.. Source_Information: Source_Citation: Citation_Information: Originator: Taylor Engineering, Inc. Publication_Date: 20070331 Title: Features created by Taylor Engineering, Inc. using digital ortho quarter quad (DOQQ) photography. Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Tampa, FL Publisher: Taylor Engineering, Inc. Other_Citation_Details: None Source_Scale_Denominator: 3000 Type_of_Source_Media: Digital Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20070331 Source_Currentness_Reference: Publication date Source_Citation_Abbreviation: BASE8 Source_Contribution: Spatial information for S_WTR_LN and S_TRNSPORT_LN created/modified by Taylor Engineering, Inc. using digital ortho quarter quad (DOQQ) photography. Source_Information: Source_Citation: Citation_Information: Originator: Taylor Engineering, Inc. Publication_Date: 20070331 Title: Water lines created by Taylor Engineering, Inc. Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Tampa, FL Publisher: Taylor Engineering, Inc. Other_Citation_Details: None Source_Scale_Denominator: 3000 Type_of_Source_Media: External hard drive Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20070331 Source_Currentness_Reference: Publication date Source_Citation_Abbreviation: BASE9 Source_Contribution: Spatial and attribute information for S_WTR_LN created by Taylor Engineering, Inc. using water polygons from the State of Tennessee Department of Finance and Administration GIS Department and "Collapse Dual Lines To Centerline" tool in ESRI ArcToolbox. Source_Information: Source_Citation: Citation_Information: Originator: Taylor Engineering, Inc. Publication_Date: 20070331 Title: Created/modified by Taylor Engineering, Inc using Taylor Tacklebox. Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Tampa, FL Publisher: Taylor Engineering, Inc. Other_Citation_Details: None Source_Scale_Denominator: 3000 Type_of_Source_Media: Digital Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20070331 Source_Currentness_Reference: Publication date Source_Citation_Abbreviation: BASE10 Source_Contribution: Any feature in which spatial or attribute information has been created/modified by Taylor Engineering, Inc using the Taylor Tacklebox. Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 1989 Title: USGS 7.5-Minute Series Topographic Maps Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Reston, VA Publisher: U.S. Geological Survey Other_Citation_Details: USGS has mapped the county with 1:24000 scale topographic maps (also referred to as 7.5-minute quadrangles). The entire county was mapped by the late 1980s. From the raster topographic maps, a vector index of the USGS topographic maps with its corresponding tile identification number and name was created. Source_Scale_Denominator: 24000 Type_of_Source_Media: Online - http://www.usgs.gov Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1989 Source_Currentness_Reference: Publication date Source_Citation_Abbreviation: BASE11 Source_Contribution: Spatial and attribute information for the index of USGS 7.5-Minute Series Topographic Map boundaries (S_QUAD_INDEX). Source_Information: Source_Citation: Citation_Information: Originator: Federal Emergency Management Agency Publication_Date: 1984 Title: Flood Insurance Study, MONTGOMERY COUNTY, TENNESSEE (AND INCORPORATED AREAS) Geospatial_Data_Presentation_Form: Map Publication_Information: Publication_Place: Washington, DC Publisher: Federal Emergency Management Agency Other_Citation_Details: Spatial information digitized from effective FIRM panels, tabular information taken from FIS reports. Source_Scale_Denominator: 24000 Type_of_Source_Media: Paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1984 Source_Currentness_Reference: Effective date Source_Citation_Abbreviation: FIRM1 Source_Contribution: Spatial information for S_FLD_HAZ, S_WTR_LN, S_WTR_AR and S_XS digitized from effective FIRM panels, and/or tabular information taken from FIS report for floodway and cross sections. Source_Information: Source_Citation: Citation_Information: Originator: Taylor Engineering, Inc. Publication_Date: 20070331 Title: Created/modified by Taylor Engineering, Inc. Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Tampa, FL Publisher: Taylor Engineering, Inc. Other_Citation_Details: None Source_Scale_Denominator: 3000 Type_of_Source_Media: Digital Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20070331 Source_Currentness_Reference: Publication date Source_Citation_Abbreviation: STUDY1 Source_Contribution: Spatial or attribute information for flood hazard features created/modified by Taylor Engineering, Inc. Source_Information: Source_Citation: Citation_Information: Originator: Taylor Engineering, Inc. Publication_Date: 20070331 Title: Spatial and Attribute Information for FL_HAZ_AR Geospatial_Data_Presentation_Form: Digital vector data Publication_Information: Publication_Place: Tampa, FL Publisher: Taylor Engineering, Inc. Other_Citation_Details: None Source_Scale_Denominator: 3000 Type_of_Source_Media: Digital Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20070331 Source_Currentness_Reference: Publication date Source_Citation_Abbreviation: STUDY2 Source_Contribution: Spatial and attribute information for S_FLD_HAZ created/modified by Taylor Engineering, Inc. using WISE and FIS report. Process_Step: Process_Description: The DFIRM Database is compiled in conjunction with the hardcopy FIRM and the final FIS report. The specifics of the hydrologic and hydraulic analyses performed are detailed in the FIS report. The results of these studies are submitted in digital format to FEMA. These data and unrevised data from effective FIRMs are compiled onto the base map used for DFIRM publication and checked for accuracy and compliance with FEMA standards. Process_Date: 20070810 Process_Step: Process_Description: Metadata imported. Source_Used_Citation_Abbreviation: C:\DOCUME~1\ag0312l\LOCALS~1\Temp\xml1C9.tmp Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Vector Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: String Point_and_Vector_Object_Count: 666 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Map_Projection: Map_Projection_Name: Lambert Conformal Conic Lambert_Conformal_Conic: Standard_Parallel: 35.250000 Standard_Parallel: 36.416667 Longitude_of_Central_Meridian: -86.000000 Latitude_of_Projection_Origin: 34.333333 False_Easting: 1968500.000000 False_Northing: 0.000000 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: coordinate pair Coordinate_Representation: Abscissa_Resolution: 0.000328 Ordinate_Resolution: 0.000328 Planar_Distance_Units: survey feet Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1983 Ellipsoid_Name: Geodetic Reference System 80 Semi-major_Axis: 6378137.000000 Denominator_of_Flattening_Ratio: 298.257222 Vertical_Coordinate_System_Definition: Altitude_System_Definition: Altitude_Datum_Name: North American Vertical Datum of 1988 Altitude_Resolution: 1.000000 Altitude_Distance_Units: feet Altitude_Encoding_Method: Explicit elevation coordinate included with horizontal coordinates Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: TNMAP.SDE.MONTGOMERY_COUNTY_S_BFE Entity_Type_Definition: Location and attributes for base flood elevations lines shown on the DFIRM Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Attribute: Attribute_Label: OBJECTID Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: BFE_LN_ID Attribute: Attribute_Label: ELEV Attribute: Attribute_Label: LEN_UNIT Attribute: Attribute_Label: V_DATUM Attribute: Attribute_Label: SOURCE_CIT Attribute: Attribute_Label: Shape Attribute_Definition: Feature geometry. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Coordinates defining the features. Attribute: Attribute_Label: Shape.len Detailed_Description: Entity_Type: Entity_Type_Label: S_FIRM_Pan Entity_Type_Definition: Location and attributes for DFIRM hardcopy map panels Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Detailed_Description: Entity_Type: Entity_Type_Label: S_Fld_Haz_Ar Entity_Type_Definition: Location and attributes for flood insurance risk zones on the DFIRM Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Detailed_Description: Entity_Type: Entity_Type_Label: S_Fld_Haz_Ln Entity_Type_Definition: Location and attributes for boundaries of flood insurance risk zones on the DFIRM Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Detailed_Description: Entity_Type: Entity_Type_Label: S_Gen_Struct Entity_Type_Definition: Location and attributes for flood control structures shown on the DFIRM Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Detailed_Description: Entity_Type: Entity_Type_Label: S_Perm_Bmk Entity_Type_Definition: Location and attributes for bench marks on the DFIRM Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Detailed_Description: Entity_Type: Entity_Type_Label: S_Pol_Ar Entity_Type_Definition: Location and attributes for political jurisdictions shown on the DFIRM Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Detailed_Description: Entity_Type: Entity_Type_Label: S_Pol_Ln Entity_Type_Definition: Location and attributes for political boundaries shown on the DFIRM Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Detailed_Description: Entity_Type: Entity_Type_Label: S_Trnsport_Ln Entity_Type_Definition: Location and attributes for roads, railroads and other transportation features shown on the DFIRM Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Detailed_Description: Entity_Type: Entity_Type_Label: S_Wtr_Ar Entity_Type_Definition: Location and attributes for hydrography features shown on the DFIRM Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Detailed_Description: Entity_Type: Entity_Type_Label: S_Wtr_Ln Entity_Type_Definition: Location and attributes for hydrography features shown on the DFIRM Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Detailed_Description: Entity_Type: Entity_Type_Label: S_XS Entity_Type_Definition: Location and attributes for cross-section lines in the area covered by the DFIRM Entity_Type_Definition_Source: FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm) Overview_Description: Entity_and_Attribute_Overview: The DFIRM Database is made up of several data themes containing both spatial and attribute information. These data together represent the current flood risk for the subject area as identified by FEMA. The attribute tables include SFHA locations, flood zone designations, BFEs, political entities, cross-section locations, FIRM panel information, and other data related to the NFIP. Entity_and_Attribute_Detail_Citation: Appendix L of FEMA Guidelines and Specifications for FEMA Flood Hazard Mapping Partners contains a detailed description of each attribute code and a reference to other relevant information. Entity_and_Attribute_Detail_Citation: The following tables are included in this data set: L_Comm_Info L_MT1_LOMC L_Stn_Start S_BFE S_FIRM_Pan S_Fld_Haz_Ar S_Fld_Haz_Ln S_Gen_Struct S_Label_Ld S_Label_Pt S_Perm_Bmk S_Pol_Ar S_Pol_Ln S_Quad_Index S_Trnsport_Ln S_Wtr_Ar S_Wtr_Ln S_XS Study_Info Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: FEMA, Map Service Center Contact_Address: Address_Type: mailing Address: P.O. Box 1038 City: Jessup State_or_Province: Maryland Postal_Code: 20794-1038 Country: USA Contact_Voice_Telephone: 1-800-358-9616 Contact_Electronic_Mail_Address: miphelp@mapmodteam.com Contact_Instructions: Data requests must include the full name of the community or county and the FIRM panel number(s) or the 7.5- minute series quadrangle sheet area(s) covered by the request. Resource_Description: Downloadable Data Distribution_Liability: No warranty expressed or implied is made by FEMA regarding the utility of the data on any other system nor shall the act of distribution constitute any such warranty. FEMA will warrant the delivery of this product in a computer-readable format, and will offer appropriate adjustment of credit when the product is determined unreadable by correctly adjusted computer input peripherals, or when the physical medium is delivered in damaged condition. Requests for adjustment of credit must be made within 90 days from the date of this shipment from the ordering site. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: ARCE Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://hazards.fema.gov Digital_Form: Digital_Transfer_Information: Format_Name: ESRI Shapefile Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://hazards.fema.gov Digital_Form: Digital_Transfer_Information: Format_Name: MapInfo Interchange file (MIF) Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://hazards.fema.gov Digital_Form: Digital_Transfer_Information: Format_Name: ARCE Digital_Transfer_Option: Offline_Option: Offline_Media: CD-ROM Recording_Format: ISO 9660 Digital_Form: Digital_Transfer_Information: Format_Name: ESRI Shapefile Digital_Transfer_Option: Offline_Option: Offline_Media: CD-ROM Recording_Format: ISO 9660 Digital_Form: Digital_Transfer_Information: Format_Name: MapInfo Interchange file (MIF) Digital_Transfer_Option: Offline_Option: Offline_Media: CD-ROM Recording_Format: ISO 9660 Fees: Contact Distributor Metadata_Reference_Information: Metadata_Date: 20080630 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Mark Aurit Contact_Organization: Taylor Engineering, Inc. Contact_Organization_Primary: Contact_Organization: REQUIRED: The organization responsible for the metadata information. Contact_Person: REQUIRED: The person responsible for the metadata information. Contact_Position: Assistant Director, Technical Support Contact_Address: Address_Type: mailing Address: 3910 Northdale Blvd. City: Tampa State_or_Province: FL Postal_Code: 33624 Country: USA Contact_Voice_Telephone: 1-813-968-2849 Contact_Electronic_Mail_Address: maurit@taylorengineering.com Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Time_Convention: local time Metadata_Extensions: Online_Linkage: http://hazards.fema.gov Online_Linkage: http://www.epsg.org Profile_Name: FEMA NFIP Metadata Content and Format Standard Metadata_Extensions: Online_Linkage: http://www.esri.com/metadata/esriprof80.html Profile_Name: ESRI Metadata Profile