Pipe Culverts and Endwalls

Updated: July 21, 2017
PIPE CULVERTS AND FLUME
 
SAFETY CROSS DRAIN ENDWALLS
 
SAFETY SIDE DRAIN ENDWALLS
 
PROTECTED ENDWALLS
 
PIPE CULVERTS AND FLUME

DRAWING

REVISION DATE

DESCRIPTION

 
FLUME DETAILS
03/16/2017
STANDARD DETAILS FOR CONCRETE PIPE INSTALLATION
01/29/2014
STANDARD DETAILS FOR FLEXIBLE PIPE INSTALLATION
 
INDUCED TRENCH SOIL EMBANKMENT FOR PIPE CULVERT INSTALLATION
04/15/1997
FERROUS AND ALUMINUM CORRUGATED METAL PIPE
07/29/1994
FERROUS AND ALUMINUM CORR. METAL PIPE-ARCHES
05/27/2001
STANDARD OVAL & FLAT BASE CONCRETE CULVERT PIPE
03/15/1976
STRUTTING DETAILS FOR CORR. METAL & STRUCTURAL PLATE ROUND PIPE
 
SAFETY CROSS DRAIN ENDWALLS

DRAWING

REVISION DATE

DESCRIPTION

06/14/2013
15” CONCRETE ENDWALL CROSS DRAIN (FOR 3:1, 4:1 & 6:1 SLOPES)
 
15” CONCRETE ENDWALL CROSS DRAIN (FOR 3:1, 4:1 & 6:1 SLOPES)
01/06/2015
18” CONCRETE ENDWALL CROSS DRAIN (FOR 3:1, 4:1 & 6:1 SLOPES)
 
18” CONCRETE ENDWALL CROSS DRAIN (FOR 3:1, 4:1 & 6:1 SLOPES)
01/21/2016
24” CONCRETE ENDWALL CROSS DRAIN (FOR 3:1, 4:1 & 6:1 SLOPES)
 
24” CONCRETE ENDWALL CROSS DRAIN (FOR 3:1, 4:1 & 6:1 SLOPES)
10/10/2016
30” CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE (FOR 3:1, 4:1 & 6:1 SLOPES)
 
30” CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE (FOR 3:1, 4:1 & 6:1 SLOPES)
06/14/2013
36” CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE (FOR 3:1, 4:1 & 6:1 SLOPES)
 
36” CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE (FOR 3:1, 4:1 & 6:1 SLOPES)
06/14/2013
42” CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE (FOR 3:1, 4:1 & 6:1 SLOPES)
 
42” CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE (FOR 3:1, 4:1 & 6:1 SLOPES)
06/14/2013
48” CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE (FOR 3:1, 4:1 & 6:1 SLOPES)
 
48” CONCRETE ENDWALL CROSS DRAIN WITH STEEL PIPE GRATE (FOR 3:1, 4:1 & 6:1 SLOPES)
11/01/2013
PIPE GRATE & SKEWED CONNECTION DETAILS FOR “U” ENDWALLS (FOR 3:1, 4:1 & 6:1 SLOPES)
 
SAFETY SIDE DRAIN ENDWALLS

DRAWING

REVISION DATE

DESCRIPTION

03/16/2017
SIDE DRAIN CONCRETE ENDWALL WITH STEEL PIPE GRATE FOR 15” AND 48” PIPES - 6:1 SLOPE
06/14/2013
CONCRETE ENDWALL TYPE “SD” WITH STEEL PIPE GRATE FOR 15” AND 18” PIPES 12:1 SLOPE
 
PROTECTED ENDWALLS*

DRAWING

REVISION DATE

DESCRIPTION

02/12/1976
TYPE “A” CONCRETE ENDWALL 2:1 SLOPE. 36” TO 78”
10/10/2016
STRAIGHT CONCRETE ENDWALL
05/27/2001
STANDARD WINGWALLS HORIZONTAL OVAL CONCRETE PIPES
05/27/2001
STANDARD STRAIGHT ENDWALLS FLATBASE CONCRETE PIPES
05/27/2001
STANDARD WINGWALLS FLATBASE CONCRETE PIPES
01/19/1997
DETAIL OF STANDARD PIPE AND PIPE-ARCH CULVERT WITH BEVELED ENDS AND RIP-RAP
04/25/1990
CONCRETE ENDWALLS TYPE "B" (FOR ROUND & SIDE TAPERED INLETS, PIPE SIZES 15" TO 78", ALL SKEWS, 2:1 AND 4:1 SLOPES) 1976
10/25/1982
GENERAL DIMENSION QUANTITIES ROUND PIPE CONCRETE ENDWALLS TYPE “B” (PIPE SIZES 15" TO 78", ALL SKEWS, 2:1 AND 4:1 SLOPES) 1976
 
GEN. DIMENSIONS AND QUANTITIES, SIDE TAPER INLETS CONCRETE ENDWALLS - TYPE “B” (PIPE SIZES 15" TO 78", ALL SKEWS, 2:1 AND 4:1 SLOPES) 1976
 
BILL OF STEEL (SHEET 1 OF 4) CONCRETE ENDWALLS TYPE “B” (FOR CONCRETE ROUND AND SIDE TAPERED INLET, PIPE SIZES 15" TO 78", ALL SKEWS, 2:1 SLOPE) 1976
 
BILL OF STEEL (SHEET 2 OF 4) CONCRETE ENDWALLS - TYPE “B” (FOR CONCRETE ROUND AND SIDE TAPERED INLET, PIPE SIZES 15" TO 78", ALL SKEWS, 4:1 SLOPE) 1976
 
BILL OF STEEL (SHEET 3 OF 4) CONCRETE ENDWALLS TYPE “B” (FOR STEEL ROUND AND SIDE TAPERED INLET, PIPE SIZES 15" TO 78", ALL SKEWS, 2:1 SLOPE) 1976
 
BILL OF STEEL (SHEET 4 OF 4) CONCRETE ENDWALLS TYPE “B” (FOR STEEL ROUND AND SIDE TAPERED INLET, PIPE SIZES 15" TO 78", ALL SKEWS, 4:1 SLOPE) 1976

*NOTE: THE PROTECTED ENDWALLS MAY NOT BE USED INSIDE THE CLEAR ZONE UNLESS SHIELDED BY GUARDRAIL OR OTHER SAFETY DEVICE.

 
If you find any mistakes, missing information or have a question, contact:
TDOT CADD Support
1300 James K. Polk Building
Nashville, TN 37243-1402
ph. 615-741-4482
ph. 615-335-8789
TDOT.CADDSupport@tn.gov

This Page Last Updated: July 24, 2017 at 3:17 pm